The Notifier CMX-2 Control Module is an addressable module that supervises and switches power to a Notification Appliance Circuit (NAC). The Notifier CMX-2 circuit can be wire as an NFPA Style Y or Style Z NAC. Alternately, the CMX can be employ as a...

The Notifier MMX-101 is a compact unit that can be install in a single gang junction box behind the monitored unit. Also, its small size and weight allow it to be install without rigid mounting. Besides, Notifier MMX-101 Monitor Modules provide a two-wire; Style...

NOTIFIER SD-651 Low-Profile Plug-In Smoke Detector

The LEM-320 module is used to expand the NFS-640/NFS2-640 to a second loop, and to expand each LCM-320 used on the NFS-3030/NFS2-3030 — each NFS-3030/NFS2-3030 LCM-320 supports an expansion LEM-320.

The NOTIFIER SDX-751 Photoelectronic Smoke Detector is an analog, addressable, low-profile smoke detector.

Notifier FST-851H is an intelligent plug-in Heat Detector providing fixed high temperature detection at 190°F/88°C. Notifier 851 Series Intelligent plug-in detectors are compatible for use with all Notifier Intelligent Fire Alarm Control Panels. Notifier 851 Series detectors can be used to replace the 751...

The Notifier FMM-1 Addressable Monitor Module is an intelligent, two-wire system, where the individual address of each module is select using the built-in rotary switch. Four different monitor modules are available for the Notifier’s intelligent control panels for a variety of applications. Monitor modules...

NOTIFIER FSP-951-IV LOW-PROFILE INTELLIGENT PHOTOELECTRIC SMOKE SENSOR  Models FSP-951 and FSP-951-IV are plug-in type smoke sensors that combine a photoelectronic sensing chamber with addressable-analog communications. The sensors transmit an analog representation of smoke density over a communication line to a control panel. Rotary dial...

The FMM-101 monitor module can be installed in a single gang junction box directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting. The FMM-101 is intended for use in intelligent, two-wire systems where the...

Intelligent (addressable) detectors with point ID capability that enable each detector address to be set with rotary address switches to provide exact detector locations. Our thermal detectors use an innovative thermistor sensing circuit to produce 135°F fixed, rate-of-rise and 190°F high-temperature detection for cost-effective,...

Fst-951-Iv Notifier Intelligent Addressable 135 Degree Thermal Detector With Flashscan And Clip, The series includes a 135°F/57°C fixed-temperature, rate-of-rise, and a 190°F/88°C fixed high-temperature detectors. These thermal detectors provide effective, intelligent property protection in a variety of applications. Detectors are available for both FlashScan®...

New Notifier FSP-851 Intelligent Smoke Detector Notifier FSP-851 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability...

Notifier FSL-751A View Laser Detector provides a revolutionary advance in early warning smoke detection technology. The unique design of this detector, combined with enhanced intelligent sensing algorithms in the Notifier AFP-2800 control panels, allows smoke detection sensitivity that is up to 50 times higher...

Model LPX-751 is a plug-in smoke sensor that combines a laser photoelectronic sensing chamber with addressable analog communications. The use of a laser diode provides substantial improvements in signal-to-noise ratio compared to a traditional LED light source. The sensor transmits an analog representation of...

Four different monitor modules are available for Notifier’s intelligent control panels for a variety of applications. Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors (FZM-1(A))....

Notifier CPX-751 Ion Smoke Detector. This smoke detector is an analog, addressable, low-profile (height measures only 1.66″/42.164 mm) smoke detectors designed for the NFS-3030, AM2020, AFP1010, NFS-640, AFP-400, AFP-300, AFP-200, and System 5000 (when equipped with an AIM-200 module).

Notifier FST-951R-IV Ivory, low-profile intelligent rate-of-rise fixed thermal sensor, FlashScan and CLIP Notifier FST-951 Series intelligent thermal detectors are designed for both performance and aesthetics and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make...

4XZM zone relay modules provide four Form C relay contacts to fire alarm control panels (FACPs).Notifier 4XZM Zone Relay Module provides Form-C general alarm and trouble contacts and the following Form-C relays: a) Zone 1.b) Zone 2.c) Zone 3.d) Zone 4. The 4XZM includes...

Notifier FSV-951R-IV Very Intelligent Early Warning Detector (Ivory) is a high-sensitivity photoelectric smoke detector designed for Very Early Warning (VIEW) Fire Detection. Compatible with FlashScan and CLIP protocol systems.  Also suitable for Duct Applications allowing both in duct and within System Sensor models DNR and...

The Notifier FSL-751 Plug-In Intelligent Very Intelligent Early Warning (VIEW) Laser Smoke Detector/ Sensor is intended for use with Notifier AFP-300, AFP-400, NFS-640, NFS2-640, NFS-320, NFS-3030 or NFS2-3030 fire alarm control panels.