Honeywell TC809A1059 FlashScan Monitor Module is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices.

Edwards EST M500CFS Addressable Intelligent Control Module

Johnson Controls M300RJ Addressable Relay Module provides the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc. Addressability allows thedry contact to be activated, either manually or through panel programming, on a select basis.....

The TC810R1024(CDN) Addressable Relay Module provides the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc. Addressability allows the dry contact to be activated, either manually or through panel programming, on a select basis....

Johnson Controls M302MJ INTERFACE MODULE，This module allows intelligent panels to interface and monitor two- wire conventional smoke detectors. It transmits the status (nor- mal, open, or alarm) of one full zone of conventional detectors back to the control panel. All two-wire detectors being monitored...

HONEYWELL TC810A1056 INTELLIGENT CONTROL MODULE

JOHNSON CONTROLS M500MJ MINITOR MODULE

The Johnson Controls M510CJ is an addressable Control Relay Module.

Uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/normal/short) of its Initiating Device Circuit (IDC) A flashing LED indicates that the module is in communication...

Mircom MIX-M500X Isolator Module The M500X Isolator Module is a standard-sized module that enables part of the communications loop to continue operating when a short circuit occurs on it. An LED indicator blinks in the normal condition and turns on during a short circuit...

Addressable monitor modules AMM-4SF feature a single Style D, Class A initiating device circuit. They may also be configured as a Style B, Class B initiating circuit with an end-of-line resistor. These modules provide an address for a group of conventional 2-wire smoke detectors....

The AOM-2RF is an addressable output relay control module. The AOM-2RF allows a Gamewell-FCI addressable fire alarm control panel to switch discrete relay contacts via software code commands. The AOM-2RF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control...

The Gamewell-FCI Velociti® Series addressable output supervised control module allows an Gamewell-FCI analog addressable fire alarm control to switch an external power supply, such as a DC supply or audio amplifier (up to 80 VRMS) to notification appliances.

4XZM zone relay modules provide four Form C relay contacts to fire alarm control panels (FACPs).Notifier 4XZM Zone Relay Module provides Form-C general alarm and trouble contacts and the following Form-C relays: a) Zone 1.b) Zone 2.c) Zone 3.d) Zone 4. The 4XZM includes...

Gamewell-FCI AMM-4 Fire Alarm Interface Module. The Addressable Monitor Module AMM-4 features a single Style D, Class A circuit. It may also be configured as a Style B, Class B initiating circuit with end of line resistor. This module provides an address for any...

The Honeywell TC810N1013 Supervised Control Module is intended for use in intelligent two-wire systems where the individual address of each module is selected using built-in rotary decade switches.

The Honeywell TC811A Fault Isolator Module is used with the Honeywell Intelligent Fire Alarm Control Panels (FACP) CLIP and FlashScan SLC’s to protect the system against wire-to-wire short circuits.

Johnson Controls J5351 Detector Intelligent Thermall w/Flash Scan

Johnson Controls M302MJ Addressable Monitor Module is a standard-sized module that monitors and supervises compatible two-wire, 24 volt, smoke detectors on a Style D (Class A) or Style B (Class B) circuit.

The Johnson Controls M500XJ Fault Isolator Module is used with the IFC Intelligent Fire Alarm Control Panels (FACP) to protect the system against wire-to-wire short circuits on the SLC loops.