FMM-101(A) is a miniature monitor module a mere 1.3″ (3.302 cm) H x 2.75″ (6.985 cm) W x 0.65″ (1.651 cm) D that supervises a Style B (Class B) circuit of dry-contact input devices. Its compact design allows the FMM-101(A) to be mounted in...

FMM-1(A) is a standard-sized module (typically mounts to a 4″ [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. The FMM-1(A) Monitor Module is intended for use in intelligent, two-wire systems,...

The Notifier FSB-200S is an Intelligent Projected Beam Smoke Detector with integral Sensitivity Test filter (requires external power supply). The FSB-200S consists of a transmitter / receiver unit and a reflector.Compatible for use with all Notifier Intelligent Fire Alarm Control Panels.COMPATIBLE ACCESSORIES:— BEAMLRK: Long...

The Notifier FSP-851T Smoke Detector is a replacement photoelectric smoke detector head compatible for use with all Notifier Intelligent Fire Alarm Control Panels. Includes a built-in 135°F (57°C) fixed-temperature thermal device. Notifier 851 Series detectors can be used to replace the 751 Series plug-in...

The Notifier FST-951H-IV Series intelligent thermal detectors are designed for both performance and aesthetics and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make the FST-951H-IV Series ideal for both system operation and building design....

The Notifier FST-951R Series intelligent thermal detectors are designed for both performance and aesthetics and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make the FST-951R Series ideal for both system operation and building design....

The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance...

FZM-1(A) is a standard-sized module that monitors and supervises compatible two-wire, 24 volt, smoke detectors on a Style D (Class A) or Style B (Class B) circuit. The FZM-1(A) Interface Module is intended for use in intelligent, addressable systems, where the individual address of...

The LCM-320 Loop Control Module and the LEM-320 Loop Expander Module provide NOTIFIER’s ONYX® Series of Fire Alarm Control Panels (FACPs) with Signaling Line Circuits (SLCs). The ONYX® Series NFS-640/NFS2-640 supports one LEM-320; the NFS-3030/NFS2-3030 supports up to five LCM-320s and five LEM-320s. The...

Notifier FSP-851(A) Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be...

The Notifier NMM-100P Addressable Monitor Module Use to monitor a single device or a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally-open dry-contact devices. May also be used to monitor normally-open supervisory devices with a special supervisory...

NOTIFIER SD-651 Low-Profile Plug-In Smoke Detector

The Network Communications Module (NCM) provides NOTIFIER’s NFS-640, NFS-3030, and NFS2-3030 Fire Alarm Control Panels, and NCA and NCA-2 Network Control Annunciators with a means to connect to NOTI•FIRE•NET™. Two types of NCM are available: NCM-W Notifier for connecting nodes with twistedpair wire, and...

The Annunciator Control Module-24AT contains 24 color-programmable (red/green/yellow) Active and 24 yellow Trouble LEDs, 24 momentary touch-pad switches, a System Trouble LED, an On-Line/Power LED, and a local piezo sounder with a silence/acknowledge switch for audible indication of alarm and trouble conditions. Includes instructions....

The NOTIFIER NCA-2 is a second-generation Network Control Annunciator for the NOTI•FIRE•NET network, compatible for use with ONYX® Series nodes such as the NFS2- 3030, NFS-3030, NFS-320, NFS-640 and NFS2-640 fire alarm control panels, as well as first-generation NCA Network Control Annunciators. Additionally, the...

The FST-751 and Notifier FST-751R intelligent thermal detectors are used with the PCR-400 Fire Alarm Systems to measure thermal levels caused by fire and report the analog level of the thermal measurement to the control panel. Also, the use of analog information provides significant...

The Notifier FSP-951R-IV Series intelligent plug-in smoke detectors come designed for both performance and aesthetics and are direct replacements for the FSP-851 Series. Besides, a new modern, sleek, contemporary design and enhanced optical sensing chamber are engineered to sense smoke produced by a wide...

The High-Speed Network Communications Module (HS-NCM) provides NOTIFIER’s NFS-320, NFS-640, NFS2-640, NFS-3030, and NFS2-3030 Fire Alarm Control Panels, NCA and NCA-2 Network Control Annunciators, and DVC Digital Voice Command with a means to connect to High-Speed NOTI•FIRE•NET (NFN). Each HS-NCM can accommodate up to...

NOTIFIER FSP-951-IV LOW-PROFILE INTELLIGENT PHOTOELECTRIC SMOKE SENSOR  Models FSP-951 and FSP-951-IV are plug-in type smoke sensors that combine a photoelectronic sensing chamber with addressable-analog communications. The sensors transmit an analog representation of smoke density over a communication line to a control panel. Rotary dial...

The Notifier ISO-X Fault Isolator Module protects the system against wire-to-wire short circuits on the SLC loops. For use with NFS-3030, AM2020, AFP1010, NFS-640, AFP-400, AFP-300, AFP-200, AFP-100 and System 5000.