The Gamewell-FCI Velociti® Series, addressable monitor module (AMM-4F) features a single Style D, Class A initiating device circuit. Configured as a Style B, as well as Class B initiating circuit with end-of-line resistor. Also, this module provides an address for any device or group...

Addressable monitor modules AMM-4SF feature a single Style D, Class A initiating device circuit. They may also be configured as a Style B, Class B initiating circuit with an end-of-line resistor. These modules provide an address for a group of conventional 2-wire smoke detectors....

The AOM-2RF is an addressable output relay control module. The AOM-2RF allows a Gamewell-FCI addressable fire alarm control panel to switch discrete relay contacts via software code commands. The AOM-2RF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control...

The Addressable Monitor Module AMM-2 features a single Style B, Class B initiating circuit with end of line resistor. This module provides an address for any device or group of devices connected to this circuit. Any alarm initiating devices with normally open (N.O.) dry contacts, such as...

The Gamewell-FCI Velociti® Series addressable output supervised control module allows an Gamewell-FCI analog addressable fire alarm control to switch an external power supply, such as a DC supply or audio amplifier (up to 80 VRMS) to notification appliances.

The VESDA replacement filter cartridge (VSP-005 for single units and VSP-025 for a pack of 20) is used to replace filter cartridges in VESDA VLC, VLF, VLP and VLS detectors. Features• Easy swap replacement filter• Fits VLC, VLF, VLP and VLS VESDA detectors• Available...

The FCI ATD-RL2 is an addressable plug-in rate-of-rise temperature sensor with 135°F fixed temperature alarm. - for use with Gamewell-FCI analog addressable fire alarm controls. COMPATIBLE INTELLIGENT BASES: B210LP Standard U.S. flanged low-profile mounting base. B710LP Standard replacement flanged low-profile mounting base. B501 Standard European...

The Velociti Series uses a communication protocol that substantially increases the speed of communication between the sensors and Gamewell-FCI thermal addressable. These devices operate in a grouped fashion. If one of the devices in the group has a status change

The Gamewell ATD-HL2 addressable plug-in thermal sensors with integral communication provide features that surpass conventional sensors. Furthermore, point ID capability allows each sensor’s address to be set, providing exact locations for pinpointing alarm locations and for selective maintenance. Features / Specifications Includes rotary address...

GAMEWELL FCI ASD-PTL PHOTOELECTRIC SMOKE

Gamewell FCI ASD-P Smoke Detector Provide features that surpass conventional sensors. Sensitivity can be programmed in the control panel.

The FCI 301PL series low profile photoelectronic smoke detector is specifically designed to meet the performance requirements of fire detection/alarm systems. The 301PL detector uses a state-of-the-art optical sensing chamber and is designed so that LED failure will not cause an alarm. The detector...

FCI Gamewell 301P Photoelectronic Detector SMOKE-AUTOMATIC FIRE DETECTOR HEAD FOR OPEN AREA PROTECTION WHEN USED WITH A S911 UL LISTED BASE

Notifier FST-951R-IV Ivory, low-profile intelligent rate-of-rise fixed thermal sensor, FlashScan and CLIP Notifier FST-951 Series intelligent thermal detectors are designed for both performance and aesthetics and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make...

The Notifier APS2-6R 6.0 Amp Auxiliary Power Supply is a 150 watt, switching auxiliary power supply providing 24 VDC of filtered DC power. The APS2-6R provides three 24 VDC output circuits, rated for 6.0 Amps in alarm and 4.0 Amps continuous. It is used...

4XZM zone relay modules provide four Form C relay contacts to fire alarm control panels (FACPs).Notifier 4XZM Zone Relay Module provides Form-C general alarm and trouble contacts and the following Form-C relays: a) Zone 1.b) Zone 2.c) Zone 3.d) Zone 4. The 4XZM includes...

The Simplex Universal Power Supply 8740-802 / 740-802 is a high-quality part that is compatible with 4100 series control panels. It is the Simplex 565-247 power supply interface board mounted on the Simplex 636-341 power supply.

The Simplex 2190-9155 provides an addressable interface between conventional zone devices and the host fire alarm control panel. Furthermore, the Simplex 2190-9155 provides status monitoring and supervision of an initiating device circuit zone and are used for circuits with non-addressable detectors and for other...

Gamewell-FCI AMM-4 Fire Alarm Interface Module. The Addressable Monitor Module AMM-4 features a single Style D, Class A circuit. It may also be configured as a Style B, Class B initiating circuit with end of line resistor. This module provides an address for any...

The Gamewell ASD-IL uses a communication protocol that substantially increases the speed of communication between the sensors and certain Gamewell-FCI analog addressable fire alarm controls. Furthermore, these devices operate in a grouped fashion. If one of the devices in the group has a status...