Mircom MIX-M500X Isolator Module The M500X Isolator Module is a standard-sized module that enables part of the communications loop to continue operating when a short circuit occurs on it. An LED indicator blinks in the normal condition and turns on during a short circuit...

Model MIX-5251RB provides both 135°F fixed and rate-of-rise thermal detection. These thermal detectors provide cost effective, intelligent property protection in a variety of applications. Features• Sleek, low profile design• Detectors are equipped with a built-in analog communications module• Smoke detectors are available with photoelectric or...

Johnson Controls M501MJ Single Input Monitor Module

Plug-in smoke detectors with integral communication provide features that surpass conventional detectors, Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal...

HONEYWELL TC830E1004 HEAT DETECTOR

Model LPX-751 is a plug-in smoke sensor that combines a laser photoelectronic sensing chamber with addressable analog communications. The use of a laser diode provides substantial improvements in signal-to-noise ratio compared to a traditional LED light source. The sensor transmits an analog representation of...

Four different monitor modules are available for Notifier’s intelligent control panels for a variety of applications. Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors (FZM-1(A))....

The Gamewell FCI ASD-PL3-IV intelligent photoelectric detectors with integral communication provide point locations for alarm communication and selective maintenance. Also, its design is a modern bright white color, the Velociti Series 3 is aesthetically pleasing for today’s contemporary buildings. In general, the Gamewell FCI...

The Gamewell-FCI Velociti® Series, addressable monitor module (AMM-4F) features a single Style D, Class A initiating device circuit. Configured as a Style B, as well as Class B initiating circuit with end-of-line resistor. Also, this module provides an address for any device or group...

Addressable monitor modules AMM-4SF feature a single Style D, Class A initiating device circuit. They may also be configured as a Style B, Class B initiating circuit with an end-of-line resistor. These modules provide an address for a group of conventional 2-wire smoke detectors....

The AOM-2RF is an addressable output relay control module. The AOM-2RF allows a Gamewell-FCI addressable fire alarm control panel to switch discrete relay contacts via software code commands. The AOM-2RF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control...

The Gamewell-FCI Velociti® Series addressable output supervised control module allows an Gamewell-FCI analog addressable fire alarm control to switch an external power supply, such as a DC supply or audio amplifier (up to 80 VRMS) to notification appliances.

The VESDA replacement filter cartridge (VSP-005 for single units and VSP-025 for a pack of 20) is used to replace filter cartridges in VESDA VLC, VLF, VLP and VLS detectors. Features• Easy swap replacement filter• Fits VLC, VLF, VLP and VLS VESDA detectors• Available...

The FCI ATD-RL2 is an addressable plug-in rate-of-rise temperature sensor with 135°F fixed temperature alarm. - for use with Gamewell-FCI analog addressable fire alarm controls. COMPATIBLE INTELLIGENT BASES: B210LP Standard U.S. flanged low-profile mounting base. B710LP Standard replacement flanged low-profile mounting base. B501 Standard European...

The Velociti Series uses a communication protocol that substantially increases the speed of communication between the sensors and Gamewell-FCI thermal addressable. These devices operate in a grouped fashion. If one of the devices in the group has a status change

The Gamewell ATD-HL2 addressable plug-in thermal sensors with integral communication provide features that surpass conventional sensors. Furthermore, point ID capability allows each sensor’s address to be set, providing exact locations for pinpointing alarm locations and for selective maintenance. Features / Specifications Includes rotary address...

GAMEWELL FCI ASD-PTL PHOTOELECTRIC SMOKE

FCI Gamewell 301P Photoelectronic Detector SMOKE-AUTOMATIC FIRE DETECTOR HEAD FOR OPEN AREA PROTECTION WHEN USED WITH A S911 UL LISTED BASE

Notifier FST-951R-IV Ivory, low-profile intelligent rate-of-rise fixed thermal sensor, FlashScan and CLIP Notifier FST-951 Series intelligent thermal detectors are designed for both performance and aesthetics and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make...

The Notifier APS2-6R 6.0 Amp Auxiliary Power Supply is a 150 watt, switching auxiliary power supply providing 24 VDC of filtered DC power. The APS2-6R provides three 24 VDC output circuits, rated for 6.0 Amps in alarm and 4.0 Amps continuous. It is used...