The Notifier FSI-751 Low-Profile Intelligent Plug-In Ionization Smoke Detector (with FlashScan) is designed for use with the entire line of Intelligent systems from NOTIFIER. The Notifier FSP-751 (photo) and Notifier FSI-751 (ion) are analog, addressable, low-profile (height measures only 1.66″/ 42.164 mm) smoke detectors...

The Gamewell FCI AMM-2F single Style B, Class B initiating device circuit (IDC) with a 47KW end-of-line resistor. This module provides an address for any device as well as group of devices connected to this circuit on the signaling line circuit (SLC) of the...

The High-Speed Network Communications Module (HS-NCM) provides NOTIFIER’s NFS-320, NFS-640, NFS2-640, NFS-3030, and NFS2-3030 Fire Alarm Control Panels, NCA and NCA-2 Network Control Annunciators, and DVC Digital Voice Command with a means to connect to High-Speed NOTI•FIRE•NET (NFN). Each HS-NCM can accommodate up to...

NOTIFIER FSP-951-IV LOW-PROFILE INTELLIGENT PHOTOELECTRIC SMOKE SENSOR  Models FSP-951 and FSP-951-IV are plug-in type smoke sensors that combine a photoelectronic sensing chamber with addressable-analog communications. The sensors transmit an analog representation of smoke density over a communication line to a control panel. Rotary dial...

The Notifier ISO-X Fault Isolator Module protects the system against wire-to-wire short circuits on the SLC loops. For use with NFS-3030, AM2020, AFP1010, NFS-640, AFP-400, AFP-300, AFP-200, AFP-100 and System 5000.

Fst-951-Iv Notifier Intelligent Addressable 135 Degree Thermal Detector With Flashscan And Clip, The series includes a 135°F/57°C fixed-temperature, rate-of-rise, and a 190°F/88°C fixed high-temperature detectors. These thermal detectors provide effective, intelligent property protection in a variety of applications. Detectors are available for both FlashScan®...

Notifier FSL-751A View Laser Detector provides a revolutionary advance in early warning smoke detection technology. The unique design of this detector, combined with enhanced intelligent sensing algorithms in the Notifier AFP-2800 control panels, allows smoke detection sensitivity that is up to 50 times higher...

The M500X Fault Isolator modules enable part of the communications signaling line circuit to continue operating when a short circuit occurs. The System Sensor M500X Isolator Module is an automatic switch that opens when the line voltage drops below four volts. This module is...

Johnson Controls JCPU2-640 CPU Board for IFC2-640

These sensors are designed to provide open area protection with 50-foot spacing capability as approved by UL 521. Model 5251B is a fixed-temperature sensor with a 135°F fixed temperature alarm. Model 5251RB is a rate-of-rise temperature sensor with a 135°F fixed temperature alarm. Model...

Mircom MIX-2251TAP is a plug-in type smoke sensor that combines a photoelectronic sensing chamber with addressable-analog communications. Also, the sensors transmit an analog representation of smoke density over a communication line to a control panel. Besides, the Mircom MIX-2251TAP adds dual electronic thermistors to...

Mircom MIX-M500X Isolator Module The M500X Isolator Module is a standard-sized module that enables part of the communications loop to continue operating when a short circuit occurs on it. An LED indicator blinks in the normal condition and turns on during a short circuit...

Model MIX-5251RB provides both 135°F fixed and rate-of-rise thermal detection. These thermal detectors provide cost effective, intelligent property protection in a variety of applications. Features• Sleek, low profile design• Detectors are equipped with a built-in analog communications module• Smoke detectors are available with photoelectric or...

Johnson Controls M501MJ Single Input Monitor Module

Plug-in smoke detectors with integral communication provide features that surpass conventional detectors, Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal...

HONEYWELL TC830E1004 HEAT DETECTOR

Model LPX-751 is a plug-in smoke sensor that combines a laser photoelectronic sensing chamber with addressable analog communications. The use of a laser diode provides substantial improvements in signal-to-noise ratio compared to a traditional LED light source. The sensor transmits an analog representation of...

Four different monitor modules are available for Notifier’s intelligent control panels for a variety of applications. Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors (FZM-1(A))....

Addressable monitor modules AMM-4SF feature a single Style D, Class A initiating device circuit. They may also be configured as a Style B, Class B initiating circuit with an end-of-line resistor. These modules provide an address for a group of conventional 2-wire smoke detectors....

The FCI ATD-RL2 is an addressable plug-in rate-of-rise temperature sensor with 135°F fixed temperature alarm. - for use with Gamewell-FCI analog addressable fire alarm controls. COMPATIBLE INTELLIGENT BASES: B210LP Standard U.S. flanged low-profile mounting base. B710LP Standard replacement flanged low-profile mounting base. B501 Standard European...