The System Sensor 2251TB is an Intelligent Addressable Photoelectric Smoke Sensor w/ Thermal (135°F / 57.2°C fixed) Sensor. The sensitivity of 200 Series detectors can be programmed using the control panel software to suit the environment. In addition, detector sensitivity is continually monitored and reported...

Edwards EST M500MF Control Monitor Module Monitor and control modules can be used to supervise and activate sounders, strobes, door closers, pull stations, waterflow switches, conventional smoke detectors, and more. Each module is rigorously designed and tested for electromagnetic compatibility and environmental reliability, in many...

The Notifier MMX-101 is a compact unit that can be install in a single gang junction box behind the monitored unit. Also, its small size and weight allow it to be install without rigid mounting. Besides, Notifier MMX-101 Monitor Modules provide a two-wire; Style...

Uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/normal/short) of its Initiating Device Circuit (IDC) A flashing LED indicates that the module is in communication...

NOTIFIER SD-651 Low-Profile Plug-In Smoke Detector

The Johnson Controls 5951J is a plug-in Intelligent Thermal Detector is designed for use with FACPs using FlashScan communications protocol.Provides 135F/57C fixed-temperature heat detection.COMPATIBLE INTELLIGENT BASES:— B210LP - Standard U.S. low-profile base— B210LPJBP: Standard U.S. low-profile base, pkg. of 10.— B210LPJ: Standard U.S. low-profile...

Edwards EST M501MF Intelligent Addressable Mini Monitor Module provides an address for a group of Normally Open (N.O.) initiating devices. The small size of the M501MF allows it to fit inside devices or junction boxes behind devices.

The NOTIFIER SDX-751 Photoelectronic Smoke Detector is an analog, addressable, low-profile smoke detector.

Honeywell intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control

The Mircom MIX-5251B Sensitivity continuously monitors and reports to the panel where the detector sensitivity can be programm. Also, point ID capability allows each address to be set with address switches. Providing exact detector locations for selective maintenance when chamber contamination reaches an unacceptable...

Honeywell TC808A1027 Plug-in Intelligent Fixed Temperature Sensor with Communications

The Addressable Monitor Module AMM-2 features a single Style B, Class B initiating circuit with end of line resistor. This module provides an address for any device or group of devices connected to this circuit. Any alarm initiating devices with normally open (N.O.) dry contacts, such as...

The Gamewell-FCI MCS-ACCLIMATE2F sensor is an analog, addressable, multi-sensing, low-profile sensor designed for use with the Gamewell-FCI analog addressable fire alarm control panels. The MCS-ACCLIMATE2F sensor uses a combination of photoelectronic as well as thermal sensing technologies that are designed to increase immunity to...

Johnson Controls M301MJ is a miniature monitor module that supervises a Style B (Class B) circuit of dry-contact input devices. The M301MJ is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides...

Edwards EST M500RF Addressable Relay Control Module is intended for use with intelligent 2-wire systems. Mounts directly to 4-inch square electrical boxes. The module can also mount to the DNR Duct Detector Housing.

The Mircom MIX-M501M monitor modules provide an interface to contact devices, such as security contacts, waterflow switches, or manual stations. Also, they are capable of Styles A and B supervised wiring to the load device. Additionally, Conventional 4-wire smoke detectors monitored through their alarm...

The LEM-320 module is used to expand the NFS-640/NFS2-640 to a second loop, and to expand each LCM-320 used on the NFS-3030/NFS2-3030 — each NFS-3030/NFS2-3030 LCM-320 supports an expansion LEM-320.

The Honeywell TC808B1066 Intelligent Plug-in Temperature Sensor (high temp 190°F) is designed for use with compatible Honeywell fire alarm control panels only using the FlashScan communications protocol. Use with compatible bases: 14507371-001, 14506414-002

Edwards SIGA-PS Intelligent Photoelectric Smoke Detector gathers analog information from its smoke sensing element and converts it into digital signals

Johnson Controls M302MJ INTERFACE MODULE，This module allows intelligent panels to interface and monitor two- wire conventional smoke detectors. It transmits the status (nor- mal, open, or alarm) of one full zone of conventional detectors back to the control panel. All two-wire detectors being monitored...