-
The Notifier CMX-2 Control Module is an addressable module that supervises and switches power to a Notification Appliance Circuit (NAC). The Notifier CMX-2 circuit can be wire as an NFPA Style Y or Style Z NAC. Alternately, the CMX can be employ as a...
- $149.00
$199.00- $149.00
- Unit price
- per
-
The FCM-1 Addressable Control Module provides Notifier intelligent fire alarm control panels a circuit for Notification Appliances (horns, strobes, speakers, etc.). Addressability allows the FCM-1 to be activated, either manually or through panel programming, on a select (zone or area of coverage) basis.
- $76.00
$99.00- $76.00
- Unit price
- per
-
NOTIFIER FCM-1-ISO Addressable Module
- $99.00
$129.00- $99.00
- Unit price
- per
-
The Notifier FCM-1-REL Releasing Control Module is specifically designed for fire suppression releasing applications in FlashScan® systems. Power to the release agent solenoid(s) runs through the module for full-time monitoring and supervision.
- $169.00
$199.00- $169.00
- Unit price
- per
-
The Notifier FDM-1A provides two independent 2-wire initiating device circuits (IDC), at two separate, consecutive addresses. It is capable of monitoring normally open contact fire alarm and supervisory devices, or either normally open or normally closed security devices. The module has a single panel...
- $109.00
$159.00- $109.00
- Unit price
- per
-
The Notifier FMM-1 Addressable Monitor Module is an intelligent, two-wire system, where the individual address of each module is select using the built-in rotary switch. Four different monitor modules are available for the Notifier’s intelligent control panels for a variety of applications. Monitor modules...
- $69.00
$89.00- $69.00
- Unit price
- per
-
The Edwards EST M500MF(B) is an intelligent Control Monitor Module.
- $119.90
$139.00- $119.90
- Unit price
- per
-
Edwards EST M500RF Addressable Relay Control Module is intended for use with intelligent 2-wire systems. Mounts directly to 4-inch square electrical boxes. The module can also mount to the DNR Duct Detector Housing.
- $159.00
$188.00- $159.00
- Unit price
- per
-
The Edwards EST M500XF is an Addressable Fault Isolator Module is compatible for use with EST3 Systems. The Edwards Est M500XF Fault Isolator Module can be used to supervise as well as activate sounders, strobes, door closers, pull stations, waterflow switches, conventional smoke detectors, and...
- $75.00
$95.00- $75.00
- Unit price
- per
-
The IDP-RELAY is an addressable relay module for use with the Honeywell Farenhyt Series fire alarm control panels (FACPs). The IDP-RELAY allows a Farehyt FACP to switch discrete contacts by code command. The relay contains two isolated sets of Form C contacts, which operate...
- $169.00
- $169.00
- Unit price
- per
-
The TC810S1000 Releasing Control Module is specifically designed for fire suppression releasing applications in Flash- Scan® systems. Power to the release agent solenoid(s) runs through the module for full-time monitoring and supervision.
- $145.00
$165.00- $145.00
- Unit price
- per
-
System Sensor M500C Control Module
- $119.00
$139.00- $119.00
- Unit price
- per
-
System Sensor M500R Relay Control Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary decade switches. It allows a compatible control panel to switch discrete contacts by code command. This module...
- $129.00
$149.00- $129.00
- Unit price
- per
-
The M502M Interface Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary decade switches. This module allows intelligent panels to interface and monitor two-wire conventional smoke detectors. It transmits the status...
- $79.99
$99.90- $79.99
- Unit price
- per
-
FMM-1(A) is a standard-sized module (typically mounts to a 4″ [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. The FMM-1(A) Monitor Module is intended for use in intelligent, two-wire systems,...
- $105.13
- $105.13
- Unit price
- per
-
Monitor and control modules can be used to supervise and activate sounders, strobes, door closers, pull stations, waterflow switches, conventional smoke detectors, and more. Each module is rigorously designed and tested for electromagnetic compatibility and environmental reliability, in many cases exceeding industry standards.
- $92.97
$129.03- $92.97
- Unit price
- per
-
FZM-1(A) is a standard-sized module that monitors and supervises compatible two-wire, 24 volt, smoke detectors on a Style D (Class A) or Style B (Class B) circuit. The FZM-1(A) Interface Module is intended for use in intelligent, addressable systems, where the individual address of...
- $93.87
$119.08- $93.87
- Unit price
- per
-
Addressable Control Module provides Johnson Controls intelligent fire alarm control panels a circuit for Notification Appliances (horns, strobes, speakers, etc.) Addressability allows the M300CJ to be activated, either manually or through panel programming, on a select (zone or area of coverage) basis.
- $89.90
$103.70- $89.90
- Unit price
- per
-
The System Sensor M500M Monitor Module provides an interface to contact devices, such as security contacts, waterflow switches, or pull stations. Rotary Switch Addressing Standby Current: 400 μA max @ 24 VDC (one communication every 5 sec. with 47k EOL); 600 μA max @...
- $78.39
$109.00- $78.39
- Unit price
- per
-
The Notifier ISO-X Fault Isolator Module protects the system against wire-to-wire short circuits on the SLC loops. For use with NFS-3030, AM2020, AFP1010, NFS-640, AFP-400, AFP-300, AFP-200, AFP-100 and System 5000.
- $66.00
$86.00- $66.00
- Unit price
- per